PLATE STOCK

QUALITY PLATE STOCK
AISI 6150

Call Integrity Steel Now
An agent is standing by!
586 826 3700
.

AISI 6150 Medium Carbon Chrome-Vanadium Alloy Steel

Hot Roll Finish
Hot Roll Finish T and B with Saw Cut Edges

Description

Most popular steel sold for high strength, impact and fatigue strength at moderate hardness.

Excellent fatigue and impact resistance at moderate hardness
Good machinability
High degree of cleanliness
Adaptable to most machine parts twice as strong as cold drawn C-1018, in annealed condition.

USES

Recommended when excellent fatigue and impact resistance at moderate hardnesses is desirable. As a die steel, it should be used only for short run die applications.

Has no peer for tool holders, arbors, gears, crankshafts, cutting tool shanks, wrenches, rams and moderately loaded brake dies. Has been found highly satisfactory for chuckjaws and collets when quenched and tempered, and for plastic molds, either pre-tempered or hardened.

TYPICAL ANALYSIS

CARBON……0.52 MANGANESE….0.84 PHOSPHOROUS…0.023

SULPHUR….0.025 CHROMIUM…..1.03 VANADIUM……...0.23

HEAT TREATMENT

FORGING ….....1850°F to 1900°F, stop at 1650°F

ANNEALING ……1500°F, furnace cool. Brinell 202

HARDENING …..1575° to 1650°F, oil quench

TEMPERING …...300° to 1100°F, hardness
......................Rockwell C-59 to C-35

MACHINABILITY

Rated at 85, as compared with a rating of 100 for a one percent carbon tool steel.

TEMPERING RESULTS

The following results were obtained on 1" round by 3" long specimens quenched from 1575° F to hardness of 60 Rockwell C. Quench temperatures lower than 1575° F will result in correspondingly lower tempered hardness and strength.

Tempering.........................Hardness
Temperatures°F..................Rockwell C
300..................................59
400..................................57
500..................................55
600..................................52
700..................................50
800..................................46
900..................................42
1000.................................40
1100................................35

.
.

Featured Services
Plate Burning
and Plasma
Plate Sawing
Up to 16'
Blanchard
Up to 120"
Fabrication
Contract Cutting
Heat Treating
.
WEBSITE BUILT BY IMPACT COMMUNICATION CONCEPTS 800 742 7656